How get iLO details from Linux?

How get iLO details from Linux?

Assuming your Linux system is functioning, you can install the iLO online configuration utility ( hponcfg ). You can use it to get the iLO’s configuration or reconfigure it. The configuration is in XML format.

How do I access my HP iLO console?

1. Start the Remote Console application by typing the IP address of the ILOM service processor into a browser on the remote system.
2. Click Yes.
3. Enter the user name and password, and click Log In.
4. Click the Remote Control tab in the ILOM web interface.
5. Set the mouse mode to Absolute mode in the Mouse Mode Settings tab.

How do I access iLO configuration?

Accessing the ROM-based setup utilities To access the UEFI System Utilities, press F9 during POST, and then select SystemConfiguration→iLO 4 Configuration Utility.

How do I find my HP iLO version in Linux?

Version state: final FIX: The BIOS and iLO firmware versions can be determined from the command line by using the dmidecode command to retrieve BIOS information. For example: # dmidecode -t bios # dmidecode 2.11 SMBIOS 2.7 present.

How do I find my HP iLO server IP?

During the HP server boot process, press the F9 key to access the system utilities.

1. Select the System Configuration option.
2. On the next screen, select the iLo Configuration Utility.
3. Select the Network Options entry.
4. On this screen, you will be find out the HP iLo interface IP address.

How do I find my iLO IP address ESXi?

Find HPE ILO IP Address from vSphere ESXi Host

1. Enable SSH on the host you need the ILO IP from.
2. SSH into the host using Putty or another SSH client.
3. Type: cd /opt/hp/tools.
4. Type: ./hponcfg -w /tmp/ilo-conf. txt.

What is iLO configuration?

Integrated Lights-Out, or iLO, is a proprietary embedded server management technology by Hewlett-Packard Enterprise which provides out-of-band management facilities. The physical connection is an Ethernet port that can be found on most ProLiant servers and microservers of the 300 and above series.

How configure iLO IP on HP server?

To configure a static IP address, use the iLO 2 RBSU with the following procedure to disable DNS and DHCP and configure the IP address and the subnet mask: 1. Restart or power up the server. 2. Press the F8 key when prompted during POST.

How do I find my Suse Linux firmware version?

Details

1. ethtool -i eth0 gives the driver, driver version, firmware version, and bus information of the eth0 device.
2. systool -c scsi_host -v gives the serial number (if available), firmware, and other information of HBAs.
3. Use dmidecode for System BIOS version and Serial Number.

How do I find my server firmware Linux?

To find out the firmware version of a Linux computer, you can use a command line tool called dmidecode. This tool dumps the content of a computer’s system BIOS table in a human-readable format.

How do I change my HP iLO IP address?

How do I set the HP iLO IP address?

1. Restart or power up the server.
2. Press the F8 key when prompted during POST.
3. Select Network –>DNS/DHCP, press the Enter key, and then select DHCP Enable.