What is the stock stall on a 4L60E torque converter?
1,650 rpm
The stock torque converter has a stall speed of 1,650 rpm.
What is a good stall for a torque converter?
Stock torque converters generally have a stall speed around 1,800-2,000 rpm. Higher stall speeds become necessary when horsepower and torque happen at higher rpm ranges. You want stall speed and maximum engine torque to happen around the same rpm range.
Can a torque converter cause stalling?
With an automatic transmission, a torque converter is used to manage the transmission fluid and keep the engine running while at a stop. If the torque converter fails, the engine can stall. There are several reasons why the converter could fail, such as overheating or dirty fluid.
Does a torque converter prevent engine stall?
Torque converter is used to manage the transmission fluid and keep the engine running while it is stopped. With an automatic transmission, this is the case. It is possible for the engine to stall if the torque converter fails.
How much HP can 4L60E handle?
Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support over 1,000 ponies.
How do I know if my torque converter is locking up?
How do I know if my torque converter is locking up? Notice your RPM reading at your dashboard. If you see that your RPM reading rises constantly even though you’re not cruising your vehicle, that’s the sign of a locking-up torque converter.
What happens if your torque converter stall is too high?
Converter stall speed must be high enough to put the engine into the torque range where it can most efficiently launch the car. If converter stall speed is too low, the car will be lazy leaving the line; if too high, there’ll be excessive high-gear slippage—either case adds time to your e.t.
Can you make a 4L60E stronger?
You can also upgrade your 4L60E to a high-volume 13-element (vane) pump which will handle pressure and volume. Inspect Transmission soft and hard parts. There’s also a need to inspect and upgrade the transmission’s soft and hard parts as the case may be.
Can a 4L60E handle 1000HP?
supports up to +1000HP.