How do you program a Timeguard timer?
Press and hold the Time button for 3 seconds, the word Hold will show on the screen. After 3 seconds release the Time button and the screen will show the year; Press the Time button repeatedly until the minutes are shown. Use Adv/Ovr or Boost to change the minutes to the correct value.
How do you set a Timeguard thermostat?
To set/alter the time and date at any time, press and hold the Select button for 3 seconds. The display light will illuminate. The hour will to flash, use the Up/Down (+/-) arrow buttons to alter the hour and press the Select button once to confirm.
How do I reset my Timeguard?
To clear programmes from memory and reset the time controller press and hold down both buttons until the display goes blank. Release buttons and display will fill with its complete range of characters and then clear to show clock and hour digit flashing. This product has a factory fitted rechargeable battery.
How do you set a Timeguard immersion timer?
Insert a pin in the Outer Circle for an OFF period. The minimum switching interval is 30 minutes, and this can be increased in 15 minute steps. Set the correct time of day by rotating the dial clockwise until the correct time is indicated by the Time indicator at the top centre of the time switch.
What is Timeguard fst77?
Timeguard’s new look Fused Spur Timeswitches with easy viewing display, optional 1 or 2 hour boost facility and automatic Summer/Winter time changeover. Clearly delivering the tried and trusted features you expect from the SupplyMaster range.
How do you use the immersion timer?
Push down the red segments on the timer face corresponding to the operating time needed. One segment is equal to 15 minutes. Turn the central clock face so that it is the current time, or rotate the outer disk clockwise so that the solid black arrow points to the current time.
What is a switched fuse spur?
A fused spur is a switch that’s used to isolate electrical equipment from the mains supply. You’ll typically find them on the left or right of your oven or hob, and next to or underneath your heater.
Is a wireless thermostat the same as a smart thermostat?
It’s not uncommon that homeowners experience a little confusion when it comes to describing what makes a smart thermostat smart when compared with a mere wireless model. That’s because a smart thermostat is indeed a wireless (aka Wi-Fi) thermostat, while a wireless or Wi-Fi thermostat isn’t necessarily a smart one.
How do immersion heater timers work?
These systems will typically have two immersion heaters installed in the side of the hot water cylinder. Each immersion will be wired into a switch or timer on the wall adjacent to it, where they can be turned on and off to heat the water as required.