Can you put a gas fireplace in a corner?

Can you put a gas fireplace in a corner?

Not only is a corner ventless gas fireplace easy to install, but it can also be moved easily between rooms. Many models offer variable flame-height adjustment so that you can range from a small flame to a crackling fire without any trouble.

How high should a mantle be above a gas fireplace?

about 12 inches
As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.

How much does a corner gas fireplace cost?

Gas Fireplace Cost by Type

Type Prefab Price Range (Installed) Custom Price Range (Installed)
Corner $1,900 – $4,400 $2,700 – $10,900
Island $2,700 – $5,800 $6,900 – $12,500
Wall-Mounted $2,900 – $3,400 N/A
Built-In $3,250 – $5,250 $5,250 – $9,200

Can you put a fireplace in a corner?

Corner fireplaces supply a space with a focal point and can leave extra wall space for installing cabinets, shelving or other fixtures. Corner fireplaces also add heightened interest to your space.

How much wall space is needed for a corner gas fireplace?

You need to contemplate more than just the size of the fireplace unit itself. Think about normal traffic flow through the room. Be sure your fireplace location is at least 36 inches from any combustible wall that lacks protection. If you add a wall protector, you may be able to reduce the clearance to 12 inches.

How wide is a corner fireplace?

Corner Fireplace Dimensions More oversized corner fireplaces for bigger homes can have dimensions as big as 41 inches in length and have a width of 54 inches. While some corner gas fireplaces have dimensions of 45.5 inches in width and a height of 40.5 inches.

How far away should mantel be from fireplace?

12”
Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box. The main factor for distance will come down to the Face Height of your mantel.

Is my mantle too high?

Mantel Height From The Top Of The Firebox If your mantel is too close to the flames, you risk catching the mantel and anything on or near it on fire. A mantel that is at least 12 inches above the opening of the fireplace should be high enough away from the flames to keep you, your family, and your house safe.

Does gas fireplace add value to home?

Return on Investment A homeowner can often recover over 100 percent of the expenses associated with adding a fireplace upon selling their home. According to the National Association of Real Estate Appraisers, adding a fireplace to home can increase the resale value of the home by as much as 6-12 percent.

Is it cheaper to run furnace or gas fireplace?

Is it cheaper to run a gas fireplace or a furnace? A modern furnace is more efficient in turning gas into heat than a gas fireplace. This means that although a furnace costs more to run per hour than a gas fireplace, it turns more of that energy into heat and can warm a whole house rather than a single room.

Do corner fireplaces save space?

A Beautiful Space-Saving Solution Rather than taking up space in the center of a wall, corner fireplaces fit neatly into a curve. In spacious living rooms, it frees up wall space on which you can hang artwork, place an entertainment unit, or add a bookshelf or curio cabinet.

Does a fireplace need a mantle?

Fireplace Mantles. Some fireplaces have mantles while others do not. A fireplace mantle is a wonderful way to dress up a fireplace so if your fireplace does not have one, you can always have one added. In fact, fireplace professionals and home contractors agree that a fireplace mantle is a good investment.

How to build a fireplace mantle?

Place a drop cloth on the floor around the hearth to catch falling soot and debris. Locate and loosen the brackets that secure the old fireplace doors.

  • Mantles are usually 60 inches off the floor. With a tape measure,mark a line 60″ above the floor.
  • Position the 2×4 mantel brace on the line at the center point.
  • How to build a custom fireplace mantel?

    Spread a canvas drop cloth onto the floor in front of the fireplace.

  • Cut three poplar boards to size to form the vertical pilasters and horizontal frieze of the fireplace mantel.
  • Join the boards together with glue and pocket screws.
  • Rout a rabbet into the back edges of the mantel so that it will overlap the wall tiles that surround the fireplace.
  • What is the standard size of a fireplace mantle?

    The common fireplace mantle is 5-6 feet wide (60″ – 72″, and when you hang the picture above the fireplace mantle, a print is placed higher, than when displayed on a regular wall. A framed artwork or canvas print could range between 30″x24″ to 40″x30″ for the best effect. Keeping with a rule of 2/3 – 3/4 the size of the mantle.