How do I know if my Polk subwoofer is working?
Check to see if the AC outlet is working. If it is, unplug the subwoofer and check the fuse in the subwoofer, which is located just above AC in line on the back of the subwoofer. The fuse type is listed on the back of the sub.
How do I connect my Polk subwoofer to my TV?
First, you need to locate the audio output port on your TV. Plug the HDMI cable to the TV’s port and then locate the audio input port on your subwoofer. Once you’ve found that, connect the other end of the HDMI cable to the subwoofer. And there you have it!
How do I connect my Polk subwoofer to my receiver?
To connect your subwoofer to the receiver, run speaker cables. Connect it to the receiver’s front right and the left speaker connections. Then connect the left and right headers to the subwoofer’s speaker connector. The subwoofers on the market usually come with speaker capabilities.
How do you reset a Polk subwoofer?
If you experience issues with your Command Bar or the supplied remote control, it may be necessary to reset to factory defaults. To reset your device, press and hold the button “Microphone Mute” and “Volume Down” on the top of the product for at least 10 seconds. After this, all settings of the Bar are erased.
Where is the sync button on the Polk subwoofer?
2 – Locate the “SYNC” button on the back of the bar, and Press & Hold for 5-7 sec. until you hear a chime from the bar. 3 – Press and Hold the “SYNC” button on the back of the subwoofer for 5-7 sec. until you hear a chime.
How do I connect my Polk speakers?
Press and hold the SYNC button on each of the surround speakers for 3 seconds. The green LED on the back of the surround speaker will start flashing at a faster rate, indicating that the sound bar and the speaker are connecting, the LED is solid green when connected.
Why does my speaker have 4 wires?
So, why do speakers have 4 terminals? Speakers have 4 terminals to allow for bi-wiring connections. Speakers with 4 terminals offer split connections, which creates two sections. Compared to speakers that have 2 terminals, the varieties that have 4 are capable of bi-wiring.
How do I get my Polk sound subwoofer to work?
Press and hold the SYNC button on the back of the subwoofer for 3 seconds. The green LED on the back of the subwoofer will start flashing at a faster rate, indicating that the sound bar and the subwoofer are connecting, the LED is solid green when connected and you hear a tone.
Why does my subwoofer have speaker outputs?
Like almost all, the sub has two sets of inputs to allow it to accept either line level or speaker level input signals. The “speaker out” you see, is just a bypass from the hi level inputs so you can run the wires that come from a stereo amplifier, through the sub and then to the speakers.
Where is the reset button on a Polk soundbar?
To reset your device, press and hold the button “Microphone Mute” and “Volume Down” on the top of the product for at least 10 seconds. After this, all settings of the Bar are erased. For the Command Bar, the light ring turns blue indicating the boot sequence has started.