What can I use to clean a dry erase board?
What can I use to clean a dry erase board?
Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner and peroxide all work well too. Be sure to stay away from wax-based cleaners as they leave a pesky film on the whiteboard.
Can you use Windex to clean a dry erase board?
Use water or common household glass cleaners. Can you use Windex® to clean a dry erase board? Yes, products such as Windex® are recommended for cleaning a whiteboard. Never use scouring pads or abrasive cleaners, as those can ruin the dry erase surface and allow ink penetration.
Do Clorox wipes ruin dry erase boards?
Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth. Abrasives or other chemical cleansers should not be used.
Does rubbing alcohol damage whiteboards?
The isopropyl alcohol it contains can help boost its cleaning power, compared to toothpaste. It won’t be as economical as toothpaste, though, and it is also a slightly abrasive cleaner. It may ruin the surface of your whiteboard over time, so it’s not recommended.
Does WD-40 clean whiteboards?
WD-40 (paid link) is the best treatment for clean whiteboards. It held up under multiple erasings and still looked great after over a week. It’s also super easy to apply — spray on, wipe off with a paper towel.
Will alcohol ruin a dry erase board?
Does WD 40 clean whiteboards?
Will a magic eraser clean a whiteboard?
Magic Eraser: By wetting a magic eraser, you are able to clean the whiteboard’s surface while removing stains and ghosting. Used Fabric Softener Sheet: A fabric softener sheet will not scratch the surface of your whiteboard, but can effectively remove dry erase ink that is on the white board for less than 24 hours.
Can you use Lysol on a whiteboard?
You should also know that there are a few solutions that you should NOT use on a whiteboard or dry erase board. Window cleaners (even our homemade window cleaner!), and Clorox, Lysol, or other disinfecting wipes could strip the finish on the board.
Can you use hand sanitizer on whiteboards?
But for hand sanitizer to work effectively to clean whiteboards, they need a much higher concentration of isopropyl alcohol – the 90% to 99% range is best. Apply hand sanitizer directly to the whiteboard, using a soft, clean cloth or paper towel to wipe it over the entire surface of the whiteboard.
Why do whiteboards stop erasing?
When whiteboard erasers become overloaded with ink, they can no longer erase efficiently. Felt whiteboard erasers have tiny lengthwise slits that tend to collect dry erase marker ink, and this can lead to smearing and smudging on your whiteboard coated surface.
What is the best way to clean dry erase board?
Use rubbing alcohol. Wet a sponge with alcohol and rub it into the stain. Dry the board with a clean, dry cloth. Use 99% or 90% isopropyl rubbing alcohol for the best results. You can put rubbing alcohol directly on a paper towel or tissue and rub that on the old marks.
How to clean an old dry erase board?
Clean the board with rubbing alcohol if you don’t have any commercial cleaner. Rubbing alcohol, or isopropyl alcohol, is a very effective cleaning solution when applied to dry erase boards. Soak a small piece of cloth in rubbing alcohol and use it to wipe the board clean.
How do you fix a dry erase board?
Rub the solution with a paint pad evenly over the scratch or the entire board, depending on the damage. A small amount of solution should be ample in most cases. Let the board dry for at least one hour. Wait about 72 hours before marking on the board and using it as you normally would.
How do you remove dry erase from board?
Saturate the end of a clean rag with 90 percent isopropyl alcohol or rubbing alcohol. Rub the alcohol-soaked end of the rag over the markings on the dry-erase board until all the ink stains come off. If the ink stains are old and permanent, you can also spray some rubbing alcohol directly on the board.