What does the Analog Discovery 2 do?

What does the Analog Discovery 2 do?

Digilent Analog Discovery 2 is a multi-function device to measure, visualize, generate, record and control mixed signal circuits. The low-cost analog Discovery 2 is small enough to fit in a pocket but powerful enough to replace a stack of lab equipment.

What is the impedance of the analog discovery scope?

Accuracy (no load): ±10mV. Output impedance: 50mΩ (typical)

Can AD2 measure resistance?

The Analog Discovery 2 cannot measure current directly, but the Math channel can be used to divide the measured voltage over the resistance of the circuit.

What is the internal resistance of Analog Discovery 2?

85 Ω
1 pC charge injection. ±2.7 V to ±5.5 V dual-supply operation. 100 pA maximum at 25°C leakage currents. 85 Ω on resistance.

How do you calibrate ad2?

  1. Step 1: Open the Device Manager. openingdevicemanager.
  2. Step 2: The Device Manager Window.
  3. Step 3: Rename Tool.
  4. Step 4: Open the Calibration Window.
  5. Step 5: Device Calibration Window.
  6. Step 6: Device Manager Tabs.
  7. Step 7: Open the Calibration Wizard.
  8. Step 8: The Device Calibration Wizard.

Why do we need oscilloscope?

An oscilloscope is an instrument that graphically displays electrical signals and shows how those signals change over time. Engineers use oscilloscopes to measure electrical phenomena and quickly test, verify, and debug their circuit designs.

What is the analog Discovery 2?

The Analog Discovery 2 is a multi-instrument test and measurement device that enables engineers to measure, visualize, simulate, and analyze mixed signal circuits of all kinds.

What is ananalog Discovery 2?

Analog Discovery 2 transforms any PC into an electrical engineering workstation. This USB-powered device enables students to build and test analog and digital circuits in any environment with the functionality of traditional benchtop instruments. Integrate Analog Discovery 2 into electronics courses with online teaching resources.

What is the breadboard adapter for the analog Discovery 2?

The Breadboard Adapter, featuring a small breadboard that connects to the Analog Discovery 2, is a way to easily set up and demonstrate portable circuits. For more information, see the Breadboard Adapter’s Resource Center .

How do I connect the analog and digital inputs and outputs?

The analog and digital inputs and outputs can be connected to a circuit using simple wire probes; alternatively, the Analog Discovery BNC Adapter and BNC probes can be used to connect and utilize the inputs and outputs.