What is a L298 motor driver?

What is a L298 motor driver?

The L298 is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors.

What does a motor driver IC do?

It listens to the low voltage from the controller/processor and control an actual motor which needs high input voltage. In simple words, a motor driver IC controls the direction of the motor based on the commands or instructions it receives from the controller.

What is the IC number for motor driver?

L293D
The L293D is a 16 pin IC, with eight pins, on each side, dedicated to the controlling of a motor. There are 2 INPUT pins, 2 OUTPUT pins and 1 ENABLE pin for each motor. L293D consist of two H-bridge.

How do you use the L298 motor driver module?

Plug one motor into the terminal labelled OUT1 and OUT2. Plug the second motor into the terminal labelled OUT3 and OUT4: 2.) The row of pins on the bottom right of the L298N control the speed and direction of the motors.

What is the difference between L298 and L298N?

The L298N H-Bridge One of the most popular is the L298N. The L298N is a member of a family of IC’s that all have the designation “L298”. The difference between the family members is in the amount of current they can handle. The L298N can handle up to 3 amperes at 35 Volts DC, which is suitable for most hobby motors.

What is L298 module?

This L298N Motor Driver Module is a high power motor driver module for driving DC and Stepper Motors. L298N Module can control up to 4 DC motors, or 2 DC motors with directional and speed control.

Why do we use a motor driver?

Motor drivers acts as an interface between the motors and the control circuits. Motor require high amount of current whereas the controller circuit works on low current signals. So the function of motor drivers is to take a low-current control signal and then turn it into a higher-current signal that can drive a motor.

What is motor driver module?

The Motor Driver is a module for motors that allows you to control the working speed and direction of two motors simultaneously . This Motor Driver is designed and developed based on L293D IC. L293D is a 16 Pin Motor Driver IC. This is designed to provide bidirectional drive currents at voltages from 5 V to 36 V.

What is H-bridge IC?

An H-bridge is an electronic circuit that switches the polarity of a voltage applied to a load. These circuits are often used in robotics and other applications to allow DC motors to run forwards or backwards.

Why L293D IC is used?

L293D IC is a typical Motor Driver IC which allows the DC motor to drive on any direction. This IC consists of 16-pins which are used to control a set of two DC motors instantaneously in any direction. It means, by using a L293D IC we can control two DC motors. As well, this IC can drive small and quiet big motors.

What is an L298 driver?

Please log in to show your saved searches. The L298 is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors.

What is the operating voltage of the L298 IC?

According to the L298 datasheet, its operating voltage is +5 to +46V, and the maximum current allowed to draw through each output 3A. This IC has two enable inputs, these are provided to enable or disable the device independently of the input signals.

What is the difference between L293 and L298?

L298 is a high power version of L293 motor driver IC. It is a high voltage, high current, dual full-bridge driver designed to accept standard TTL logic levels (Control Logic) and drive inductive loads such as relays, solenoids, DC and Stepper motors. Two enable inputs are provided to Enable or disable the device independently of the input signals.

How do I connect two motors to a l298n?

Plug the second motor into the terminal labelled OUT3 and OUT4: 2.) The row of pins on the bottom right of the L298N control the speed and direction of the motors. IN1 and IN2 control the direction of the motor connected to OUT1 and OUT2. IN3 and IN4 control the direction of the motor connected to OUT3 and OUT4.