What model is my Smeg dishwasher?
What model is my Smeg dishwasher?
The Smeg model number is located on the lower part of the Smeg hob which is fixed to the casing. In order to read it, you must access the lower part. A copy of the label is included with the instruction booklet.
How do you use a Smeg dishwasher for the first time?
STARTING THE PROGRAM To start the dishwasher, press the START/PAUSE button (6) for a few seconds, until the light of the selected program starts to flash (confirmation beep). The light will flash as long as the program is in progress, to indicate that it is being performed.
Can you install dishwasher yourself?
A: Yes, you can have a dishwasher in your kitchen. Furthermore, you can do most of the work yourself and save a bunch of money. Four things are necessary for a built-in dishwasher: a place for it; a water supply line; a drain line; and power.
Do integrated dishwashers come with door fixings?
Do integrated dishwashers come with the door fixings? Yes, your integrated dishwasher will come with everything you need to fit a door, except the door itself.
How do I read my Smeg serial number?
The Smeg model number is listed as a ‘MOD’ number and is a combination of letters and numbers (e.g. SUK62MFX5). The Smeg serial number is listed as a ‘N’ or ‘S/N’ number and is an 8 to 10 digit number (e.g. 108 51423).
Where do I find my Smeg serial number?
How to find the model and serial number on your Smeg small appliance. The model and serial number on small domestic appliances can be located on the base of the Product. The only difference is with the handblenders where it will be located on the motor unit.
Should you run a new dishwasher before first use?
Run an empty load. Before you start the cycle, it’s also worth tossing in a cup or two of white vinegar. It’ll clean the interior of any random debris or scum from the manufacturing process. Repeat this “rinse” every month or so to keep things squeaky clean.
How do you install a dishwasher?
Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fi t the special insulating panel to prevent overheating and malfunction of the appliance.
How to install a dishwasher under a ceramic hob?
A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass. Level the appliance on the fl oor using its adjustable feet. This operation is essential for the ensuring correct operation of the dishwasher. Building-in a dishwasher underneath a ceramic hob is absolutely forbidden.
How many place settings does a dishwasher have?
Page 30 User instructions Using the baskets The dishwasher has a capacity of 15 place-settings, including serving dishes. LOWER BASKET The lower basket receives the full force of the lower spray arm, and should therefore be used for the “toughest” items with a heavier degree of soiling.
How do you adjust the rinse aid on a Whirlpool dishwasher?
Page 26 ADJUSTING THE RINSE AID DISPENSER SETTING The dishwasher is factory set for medium water hardness. However it possible to change the setting by turning the dispenser’s selector to the desired position: the amount of rinse aid dispensed is proportional to the selector position.