How do you program a Leviton Z wave switch?
How do you program a Leviton Z wave switch?
Enter Programming Mode by holding the top of the paddle for 7 seconds, the Locator LED will blink amber. Tap the top of the paddle one time. The Locator LED will quickly flash green. The Decora SmartTM Z-Wave® device is ready to learn into the Z-Wave® network.
Does Leviton Z Wave require a hub?
Whether you have two smart devices (like the Leviton Z-Wave Dimmer and Switch) or 200, all you need is one Hub to create a smart home.
How do I sync my Leviton switch?
– Locate and open the Leviton “Decora Digital Dimmer & Timer” app on your smart device. – Select the “+” sign at the top right corner to add your Decora Digital device. – Follow the on-screen instructions to pair your smart device: – Hold the OFF button on your Decora Digital device until its status LED blinks.
How do I reset my Leviton Smart Switch?
Leviton decora smart switch reset
- Hold the top of the paddle for 7 seconds. After 7 seconds the Locator LED will blink amber.
- Release the top of the paddle and the switch will reset.
- Once the switch has reset the Locator LED will blink green.
How do you reset a Leviton Decora switch?
How do you reset a Leviton Z Wave dimmer switch?
Hold the the top of the paddle for a total of 14 seconds. After the first 7 seconds the LED turns amber. The Locator LED will quickly flash red/amber after 14 seconds. Release the the top of the paddle and the device will reset.
Why is my Leviton not working?
Make sure you have the latest version of the My Leviton App. To ensure that you are running the latest version of the app, check for a My Leviton app update on the Apple App store or Google Play store. If available, try using a different mobile phone or tablet running the My Leviton app.
Why is my smart light switch not working?
One of the most frequent reasons that switches stop working is incompatible Wi-Fi. In this case, you either have to switch off 5 GHz or replace older 2.4 GHz switches. In the same vein, if you’ve moved your router, the switch might now be out of range.
How do you put Z-Wave in inclusion mode?
Remove the back cover, there have one button on PCB board which can be executed inclusion, exclusion and reset from Z-Wave™ network. mode 2、 Power on the device. 3、 Press the button 3 times within 1.5s. 4、 The device will be entered into inclusion mode automatically.