Should RAM timings be higher or lower?

Should RAM timings be higher or lower?

Technically, lower RAM timings are better (example: 8-8-8-21 is better than 9-9-9-24). However, with modern processors the performance increase isn’t really worth the cost unless you absolutely must squeeze that last percentage point out of your system.

What do the timings mean on RAM?

Timings are another way of measuring RAM speed. The timings measure the latency between various common operations on a RAM chip. Latency is the delay between operations. We measure RAM timing in clock cycles. Retailers list timings as four numbers separated by dashes, like 16-18-18-38.

What are the 4 RAM timing numbers?

tRAS. Timings are most commonly broken down to the four values: CAS Latency (CL), Row Column Delay (tRCD), Row Precharge Time (tRP), and Row Active Time (tRAS).

What is the best RAM timing?

How fast should RAM be for a gaming PC? Generally, we’d recommend you stick with two DDR4 modules for a dual-channel build, each with a minimum of 3,000MHz clock speed. That should ensure you’re getting the most out of the best CPUs for gaming.

Is lower timings better?

Higher data rates improve performance, within the limits of a CPU and motherboard. Lower latency increases performance without increasing the data rate.

Does RAM timing affect performance?

Do RAM timings affect gaming performance? – Quora. Yes, because higher timings means it takes longer for RAM to be accessed. This can be offset with higher DRAM frequency. 3200 CL16 has the same gaming performance as 3600 CL18.

Can I use RAM with different timings?

Yes, as long as both RAM sticks are capable of running at the same speed and timings, they should run fine in a dual channel configuration.

How do I check my RAM timings?

Start the application and go to the Memory tab. Look for the Timings section. There you can see your memory frequency (multiply it by two if you have dual-channel RAM) and primary timings.

Can you mix RAM with different timings?

Is it OK to Mix RAM Speeds? It is entirely possible to operate two or more RAM modules at different speeds. However, just like mixing brands, you will default to the lowest-performing RAM modules. For example, let’s say that one set of RAM modules are 16GB CORSAIR DDR4 3200 MHz with a 16 CAS latency.

What do DDR4 timings mean?

The memory timings are given through a series of numbers; for instance, 4-4-4-8, 5-5-5-15, 7-7-7-21, or 9-9-9-24. These numbers indicate the amount of clock cycles that it takes the memory to perform a certain operation. The smaller the number, the faster the memory.

Is 3200 Mhz RAM good?

3,200MHz memory (with the common timings of 16-18-18) should be considered the baseline for all budget systems. The only reason you should go with very fast 4,000MHz+ RAM is if you’re running a high spec system and you’re into competitive first person shooter games on a high refresh monitor.

Does RAM timing matter?

Overall, we certainly found that if you dig deep enough, you’ll discover that timings definitely matter. It won’t impact every game or application, but on the margin, it does make sense to at least consider timings when buying RAM, especially if you can get tighter timings for a lower price.

What are the timings for different types of DDR memory?

Below is a table that displays some standard timings for different types of DDR memory. Timings are most commonly broken down to the four values: CAS Latency (CL), Row Column Delay (tRCD), Row Precharge Time (tRP), and Row Active Time (tRAS).

What are the RAM timings?

When you see ram timings, they are generally represented like this: 9-9-9-24 or CL- tRCD-tRP-Tras (See below) there are more advanced ram timings, but these are the most important and we will cover the others later.

What is the difference between memory module speed and timing?

When the topic of memory performance comes up, most people usually think of a memory module speed. Module speed is a measure of the ability to transfer data, like: DDR2 800MHz, DDR3 1600MHz, and DDR4 2400MHz (or MT/s). Timings, however, determine how fast your memory can respond to requests for performing actions.

What is 1600Mhz DDR3 memory?

DDR3 Memory Timings Explained. Double Data Rate means that this memory transfers data on both the rising and falling edges of the clock signal. This is why 1600mhz DDR3 memory appears as 800MHz in cpuid. This is the current type of memory used in modern systems. It is not backward compatible with any other type or memory.