What year did the 351W go to EFI?

What year did the 351W go to EFI?

The engine’s cylinder heads were designed to deliver a broad torque curve, compromising high rpm horsepower. Electronic fuel injection replaced carburetion for the 351W in 1988.

How much horsepower does a 351 Windsor EFI have?

351W Windsor / 410 HP Atomic EFI Fuel Injection.

Is a 351 Windsor fuel Injected?

The mild 351 Windsor was equipped with AFR 185 Heads, a hydraulic roller cam that offered . Both the carbureted and injected combinations were optimized for air/fuel (13.0:1) and timing 34 degrees total. All temperatures (air, oil, water) were kept constant for all testing.

Is the 351 Windsor a good engine?

Ford’s 351W engines are virtually bulletproof. The blocks, even on the 1975+ models, are very stout and will not give any problems until serious power is added. The rods, pistons, and other internal components are rock solid as well. Overall, the 351 Windsor is a tough engine and is built to take a beating.

What year 351W is best?

Registered. From what I have read, the best year for 351W blocks are 1969, 70, and 71. For some reason these were the strongest 351W ever produced, but very hard to find.

Which has more horsepower 351 Cleveland or 351 Windsor?

The 351 Cleveland is a member of the 335 series family of Ford small-block engines. Its large ports and oversize canted valves give it more horsepower and allow it to run at a higher rpm than the Windsor. The valve covers have a twisting curve and are attached by eight bolts.

How can I get more horsepower out of my 351 Windsor?

The key to making more horsepower in the 351 Windsor, or any engine, is to move more gas/air mixture through the engine. That means improving the flow in the heads. You can use a myriad of performance tricks to achieve higher head-flow. The first one is making sure air isn’t being restricted as it enters the engine.

What year is the best 351 Windsor?

Best years From what I have read, the best year for 351W blocks are 1969, 70, and 71. For some reason these were the strongest 351W ever produced, but very hard to find.

Is 351 Windsor a big block?

The 351W is named for the factory in Windsor, Ontario that produced them. It is part of the long-running Ford small-block Windsor V8 family, which also includes the venerable Ford 302 (5.0L) V8. It shares the same small block V8 bellhousing pattern and motor mounts of the August 1964+ Windsor engines*.

How long will a 351 Windsor last?

How Long Will A 351 Windsor Last? If you never cross the 3000-rpm limit, which almost no one does, you can expect the engine to wear out after 300000 miles completely.

What is the better engine Cleveland or Windsor?

Can you put a turbo on a 351 Windsor?

Capable of exceeding 700 hp each, we had more than 1,400 hp worth of turbos for the 351W. The stock crank, rods, and pistons were all still in place, so we cranked up the boost to 12.6 psiā€”the 5.8L pumped out 790 hp and 776 lb-ft of torque.

What type of engine does a 351 Windsor have?

The 351 Windsor engine first appeared in 1969 and is based on a 90-degree V8 design that utilizes an overhead valve train. This design uses hydraulic lifters and is operated by a camshaft located in the center of the engine block. As the name implies, the Windsor’s total cylinder volume displaces 351 cubic inches.

What is the firing order for a 351 Windsor engine?

The firing order for the 351 Windsor is 1-3-7-2-6-5-4-8 with the No. 1 cylinder located on the right side of the engine at the front.

How much horsepower does a 351 Windsor motor have?

The 351 Windsor in stock form creates 380 pound-feet of torque at 3,400 rpm and 300 base horsepower. Torque and horsepower ratings for later versions vary depending upon their intended applications and emissions requirements.

How much horsepower does a 351 EFI engine have?

The 351 was available as a two-barrel which was a basic engine and a four-barrel, or performance, engine. The two-barrel was rated at 240 horsepower while the four-barrel was rated at 285 horsepower.