Is hardox the same as AR500?

Is hardox the same as AR500?

AR500 steel is exactly the same as Hardox 500 steel – it is simply a name. The crucial part is the 500 section as this dictates the Brinell hardness – this is what stops the bullet piercing the plate! Suitable for all ammunition up to 50 calibre. Ammunition: 6.5 x 55, 140 grain.

How hard is hardox 400?

Hardox® 400 is an abrasion-resistant steel with a nominal hardness of 400 HBW. Hardox® 400 is an all-around wear resistant steel. Thanks to its high toughness, good bendability and weldability, this steel can be used in structures with moderate wear.

How do you cut Hardox plates?

HARDOX wear plate can very well be cut using both cold and thermal cutting methods. The cold methods are abrasive water jet cut- ting, shearing, sawing or abrasive grinding, while thermal methods are oxy-fuel, plasma and laser cutting.

What is hardox plate?

Hardox, also known simply as wear plate, is a wear-resistant sheet steel developed by the Swedish company SSAB in 1974. The material’s high strength enables thinner metal sheets to be used, meaning products can be made to be simpler and lighter while still carrying high payloads.

What is the difference between Hardox and ar400?

AR400F is quenched and tempered through hardened wear resistant grades of abrasion resistant steel plate used for high impact and abrasion resistance. Hardox® 450 is a quenched and tempered produced plate that is used in Dump bodies, crushers, feeders, cutter edges, buckets, etc.

Is Hardox an alloy?

Steel plate of this standard has one feature of low carbon content, which improves its flexibility and impact resistance; Alloy content chromium and nickel content improves steel state for better wear resistant ability. Hardox 400 has the lowest hardness, hardness increases as the steel grade rises.

Is Hardox heat resistant?

Hardox® HiTemp is a high-heat grade of Hardox® wear plate that provides a cost-efficient solution for wear resistance at high temperatures in the 300–500°C range (570–930°F).

Can you weld Hardox?

Hardox® wear plate combines unique performance with exceptional weldability. Any conventional welding methods can be used for welding these steels to any type of weldable steel. It offers advice on preheat and interpass temperatures, heat input, welding consumables and more.

Can hardox be plasma cut?

Hardox and Strenx are easily cut by the plasma cutting process. Plasma cutting has a limitation when it comes to material thickness and the main thickness to be cut is below 50 mm (plasma cut- ting machine dependent).

Can hardox be laser cut?

All Hardox and Domex steels can be perfectly laser-cut because of their consistent steel properties, low thickness tolerances, outstanding flatness and surface finish, as well as low alloy and optimized chemical composition. The high steel quality also allows for smaller radii and ensures accurate results when bending.

What steel is hardox?

Hardox® 500 is a bendable and weldable abrasion-resistant steel, with a nominal hardness of 500 HBW. Suitable for applications that demand higher wear resistance. Hardox® 500 increases payload and increases service life while maintaining good processability and toughness.

Why HARDOX plates are so versatile?

Because Hardox plates are more lightweight than other types of steel plates, using them in trucks, containers and buckets decreases the overall weight. A lower weight application in turn reduces fuel costs, increases payload and allows you to build bigger carrying devices that can handle larger loads.

What is equivalent material of Hardox 400?

Hardox steel is a speciality steel having hardness of more than 400BHN offered by SSAB Sweden. Another equivalent material available in the market is Abrex 400 offered by NSSM and Dillimax by Dillinger. Metal Sheet, Plate & Parts :HARDOX / RAEX (400, 450

What is Hardox 450?

Hardox 450 is an abrasion resistant steel with a nominal hardness of 450 HBW. Typical applications are components and structures subject to wear. Hardox 450 is available in thickness of 3 – 130mm.

What is a wear plate?

Definition of wear plate. Sections of hardened steel plates of various thicknesses (as desired) which are welded (or bolted) in areas of severe wear, such as the insides of feeders, crushers, transfer chutes, or any other area where mined material passes, creating abrasion, and threatens wearing of these areas.