What is a Fender Concert amp?

What is a Fender Concert amp?

The Fender Concert was a guitar amplifier made by Fender Musical Instruments. Its production can be split over 2 phases. In a later phase, the Concert was updated by Paul Riviera in the early 1980s (“concert” and “concert II”) and a subsequent 1×12 variant of the Concert amp appeared briefly in the mid-1990s.

How many watts is a Fender Concert amp?

Product Specs

Brand Fender
Model Concert Amp 2-Channel 60-Watt 1×12″ Guitar Combo
Finish Black
Year 1993 – 1995
Made In United States

When did Fender switch to Silverface?

With their stated power of 85 watts, they are the most powerful Fender amps of the era. In 1968 Fender changed to the “silverface” control panel. The circuitry was altered as well: There were changes to the bias and phase inverter circuits and, most important, the output stage.

What was the first Fender amp with reverb?

Fender Vibroverb
The Fender Vibroverb was a 40-watt combo guitar amplifier originally manufactured in 1963 and 1964. It was the first Fender amplifier to incorporate on-board reverb which became a standard feature on many high-end Fender tube amps during the 1960s and 1970s.

How do you date a Fender amp?

From 1990 to the present, all fabricated Fender amplifiers have a date code. This is printed on the quality assurance sticker (QA) on the back of the amplifier chassis. On older models, the serial number is punched on the right side of the chassis. More recent models are have a sticker.

How many watts is a Fender Bassman?

Fender ’59 Bassman LTD 45-watt Guitar Amplifier Features at a Glance: 45-watt tube guitar amplifier. 4 x 10″ (Jensen P-10R) 2 channels – normal and bright.

What is a Fender Silverface?

Fender Silverface amplifiers were built between 1967 and 1981. They are often referred to as Silverface or Chromeface because of their brushed aluminum face plate. The first Silverface amps, manufactured between 1967 and 1969, had an aluminum frame trim, known as a “drip edge” around the grillcloth.

When did Fender start making amplifiers in Mexico?

In 1985, Fender opened its flagship U.S. factory and headquarters in Corona, California, followed by a second manufacturing facility in Ensenada, Mexico in 1987. That same year, the renowned Fender Custom Shop debuted at the Corona facility.

What amps did SRV use?

The amplifiers he used on stage included:

  • Two “Blackface” Fender Super Reverbs.
  • Marshall Club & Country combo amp with 2×12″ JBL speakers.
  • Two 1964 “Blackface” Fender Vibroverb amplifiers (numbers five and six off production line), each with one 15″ speaker.

When did Fender start making amplifiers?

Leo Fender began building guitar amps before he started manufacturing guitars. The first of these amps were the K&F models, which were produced be- tween 1945 and 1946. The original Fender amps were tube powered, and the company also started producing solidstate models in the late 1960s.

How do I date my vintage Fender amp?

All Fender amplifiers manufactured from 1990 – present include a date code printed on the quality assurance (QA) sticker on the back of the amp chassis, and are dated the by the first letter as the year and the second letter as the month.

How do I tell what year my Fender amp is?

If you want to know the production year of Fender amplifier, you can decipher it with the serial number decoder. On the inside of the cabinets of Fender amplifiers that were built after 1950 and before 1970, a sticker is generally attached. This indicates the type of the tubes used and their location on the chassis.

What kind of AMP is this Fender Concert?

This was a 1983 Fender Concert amp that was part of the series of amps that were designed by Paul Rivera.

When did the Fender Concert professional series come out?

Unlike most of the other Professional Series amps however, the Concert (along with Fender Vibrasonic) were not previously offered as tweed-covered models in the 1950s. In late 1959, all of the Professional Series of Amps were debuted at the summer NAMM show.

When did Fender stop making 4-10 amps?

By the end of 1963 and into early 1964, the Concert amp transitioned into black tolex with silver grill along with the rest of the Fender Amplifier line. By approximately 1965, Fender decided on the Fender Super Reverb Amp as the only 4–10 model to continue. Fender Concert Amp, late 1959, early 1960, model 5G12.

What is the best 1960 Fender amp on the market?

Read on and find out why this is the best 1960 Fender Amp currently on the market. 1960 FENDER BANDMASTER 3×10 COMBO Pretty rare especially in this condition. Sounds great. Very clean. 3 x Jenson speakers.